8 0015.2b3d.cbbb to 0015.2b3d.cbbb 1.7 Unknown Unknown PwrDown
Mod Online Diag Status
8 Not Applicable
Another weired output:
Switch#show module csm 8 status
CSM module is offline.
Requires CSM module version 3.1.
Following are the logs we are getting:
Sep 6 14:32:15.061 : ÃKPWR-SP-4-DISABLED: power to module in slot 8 set off (Module Failed SCP dnld)
Sep 6 14:33:57.222 : %ONLINE-SP-6-TIMER: Module 8, Proc. 0. Failed to bring online because of timer event
Sep 6 14:33:57.222 : ÃKPWR-SP-4-DISABLED: power to module in slot 8 set off (Module Failed SCP dnld)
Sep 6 14:34:14.445 : ÃKPWR-SP-4-DISABLED: power to module in slot 8 set off (Reset)
We also physically removed the CSM module and insert it again but issue is still same.
We are also unable to access the csm module by the following command:
Switch#session slot 8 processor 0
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 127.0.0.80 ...
We have also enabled the power serveral times by the following command:
Switch(config)#power enable module 8
How can I rollback(downgrade) the CSM software to the previous software.
We are using IOS version "IOS (tm) s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)
SXF7, RELEASE SOFTWARE (fc1)".
when we remove this CSM module (slot 8) and insert it onto another slot (say slot 3), the module boots properly, without any issues. But ofcourse there is no configuration for this module in the running configuration. The 'show module' output on the core switch display the new version correctly 4.2(12). I can also do a 'session slot 3 proc 0' successfully. I have also checked the file we downloaded via an MD5 checker, and the file is not corrupted.
But when we again insert the module in slot 8 or 3, now the module won't boot in any slot. Same error as before for slot 8.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...