Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CSM L2/L3 Hybrid Mode?

This might seem like an odd question but, we have a csm 4.1.6 running Bridge Mode and wanted an easy way to migrate over to secure routed mode. We wanted to see if it was at all possible to run bridge mode and securemode on the same box to migrate users off L2 bridged vlans and onto the L3 secure vlans without purchasing additional CSM's. If so, are there any issues we should be aware of...Thoughts?

  • Application Networking
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CSM L2/L3 Hybrid Mode?

you can have a mix of both brigde and secure mode at the same time.

This is no problem.

there is no particular concerns related to this kind of setup.

Gilles.

2 REPLIES
Cisco Employee

Re: CSM L2/L3 Hybrid Mode?

you can have a mix of both brigde and secure mode at the same time.

This is no problem.

there is no particular concerns related to this kind of setup.

Gilles.

New Member

Re: CSM L2/L3 Hybrid Mode?

Thx Giles, sounds good we will start plannig this project right away...Thx again, Take Care!

139
Views
0
Helpful
2
Replies
This widget could not be displayed.