the persistent rebalance command tells the CSM to look at every HTTP request to select the best server. So, if you have a persistent connection ( 1 tcp connection for many http requests ), the CSM will look at each request.
Otherwise, it only looks at the first request and assumes all the other requests stick to the same server. Which is normally true, except if you have a proxy connecting to your vserver.
You still need 4.2.x to allow sticky on header info.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...