CSM module

[Michal Valach]

Hello, I have one question please....

I have 2 servers for loadbalancing, www page is working for everybody, but I still see total conns established=0, do you know why? Or how to check if load balancing is working? thx a lot

server1, serverfarm, state = OPERATIONAL

  address = 1.1.1.1, location = <NA>

  conns = 0, maxconns = 4294967295, minconns = 0

  weight = 8, weight(admin) = 8, metric = 0, remainder = 0

  total conns established = 0, total conn failures = 0

server2, serverfarm, state = OPERATIONAL

  address = 2.2.2.2, location = <NA>

  conns = 0, maxconns = 4294967295, minconns = 0

  weight = 8, weight(admin) = 8, metric = 0, remainder = 0

  total conns established = 0, total conn failures = 0

[sivaksiv · Accepted solution]

Hi,

Check if you are getting any connecitons to VIP using command below. You have options to filter with specific client ip too.

show module csm slot conns

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csms/2.1.1/command/reference/s.html#wp1055505

Regards,
Siva

[Michal Valach]

no connections

    prot vlan source                destination           state

----------------------------------------------------------------------

[sivaksiv]

Looks like the traffic is not passing through the CSM, hitting server directly? Do you access the VIP on CSM that loadbalances to the servers?

Regards,

Siva

[Michal Valach]

but user can access the page and:

server1, serverfarm, state = OPERATIONAL

server2,serverfarm, state = OPERATIONAL

I canot access VIP

[sivaksiv]

To loadbalance, you should access the VIP not the server directly.

[Michal Valach]

Problem resolved. Thank you sivaksiv for your help. The problem was that I was connected to standby CSM :-).

Sorry for confusion.