Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CSM module

Hello, I have one question please....

I have 2 servers for loadbalancing, www page is working for everybody, but I still see total conns established=0, do you know why? Or how to check if load balancing is working? thx a lot

server1, serverfarm, state = OPERATIONAL

  address = 1.1.1.1, location = <NA>

  conns = 0, maxconns = 4294967295, minconns = 0

  weight = 8, weight(admin) = 8, metric = 0, remainder = 0

  total conns established = 0, total conn failures = 0

server2, serverfarm, state = OPERATIONAL

  address = 2.2.2.2, location = <NA>

  conns = 0, maxconns = 4294967295, minconns = 0

  weight = 8, weight(admin) = 8, metric = 0, remainder = 0

  total conns established = 0, total conn failures = 0

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

CSM module

Hi,

Check if you are getting any connecitons to VIP using command below. You have options to filter with specific client ip too.

show module csm slot conns

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csms/2.1.1/command/reference/s.html#wp1055505

Regards,
Siva

6 REPLIES
Cisco Employee

CSM module

Hi,

Check if you are getting any connecitons to VIP using command below. You have options to filter with specific client ip too.

show module csm slot conns

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csms/2.1.1/command/reference/s.html#wp1055505

Regards,
Siva

New Member

CSM module

no connections

    prot vlan source                destination           state

----------------------------------------------------------------------

Cisco Employee

CSM module

Looks like the traffic is not passing through the CSM, hitting server directly? Do you access the VIP on CSM that loadbalances to the servers?

Regards,

Siva

New Member

CSM module

but user can access the page and:

server1, serverfarm, state = OPERATIONAL

server2,serverfarm, state = OPERATIONAL

I canot access VIP

Cisco Employee

CSM module

To loadbalance, you should access the VIP not the server directly.

New Member

CSM module

Problem resolved. Thank you sivaksiv for your help. The problem was that I was connected to standby CSM :-).

Sorry for confusion.

225
Views
0
Helpful
6
Replies