08-02-2012 03:58 AM
Hello, I have one question please....
I have 2 servers for loadbalancing, www page is working for everybody, but I still see total conns established=0, do you know why? Or how to check if load balancing is working? thx a lot
server1, serverfarm, state = OPERATIONAL
address = 1.1.1.1, location = <NA>
conns = 0, maxconns = 4294967295, minconns = 0
weight = 8, weight(admin) = 8, metric = 0, remainder = 0
total conns established = 0, total conn failures = 0
server2, serverfarm, state = OPERATIONAL
address = 2.2.2.2, location = <NA>
conns = 0, maxconns = 4294967295, minconns = 0
weight = 8, weight(admin) = 8, metric = 0, remainder = 0
total conns established = 0, total conn failures = 0
Solved! Go to Solution.
08-02-2012 04:03 AM
Hi,
Check if you are getting any connecitons to VIP using command below. You have options to filter with specific client ip too.
show module csm slot conns
Regards,
Siva
08-02-2012 04:03 AM
Hi,
Check if you are getting any connecitons to VIP using command below. You have options to filter with specific client ip too.
show module csm slot conns
Regards,
Siva
08-02-2012 04:24 AM
no connections
prot vlan source destination state
----------------------------------------------------------------------
08-02-2012 04:43 AM
Looks like the traffic is not passing through the CSM, hitting server directly? Do you access the VIP on CSM that loadbalances to the servers?
Regards,
Siva
08-02-2012 04:47 AM
but user can access the page and:
server1, serverfarm, state = OPERATIONAL
server2,serverfarm, state = OPERATIONAL
I canot access VIP
08-02-2012 04:49 AM
To loadbalance, you should access the VIP not the server directly.
08-02-2012 05:04 AM
Problem resolved. Thank you sivaksiv for your help. The problem was that I was connected to standby CSM :-).
Sorry for confusion.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide