Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CSM modules and IPv6

Hi,

I'm looking for a solution to allow ipv6 clients to access content behind 6509 witch csm. I can't find and examples of possible solution. Can anyone give a hint if it's possible (except using some reverese proxe in front of csm)?

tia

mazek

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CSM modules and IPv6

The CSM does not support IPV6, so the routing option is not possible.

You could try bridge mode.

Have the MSFC in vlan XX and the servers in vlan YY and the CSM bridging between the 2.

IPV6 traffic should be bridged accross the CSM with no problem.

Gilles.

1 REPLY
Cisco Employee

Re: CSM modules and IPv6

The CSM does not support IPV6, so the routing option is not possible.

You could try bridge mode.

Have the MSFC in vlan XX and the servers in vlan YY and the CSM bridging between the 2.

IPV6 traffic should be bridged accross the CSM with no problem.

Gilles.

119
Views
0
Helpful
1
Replies