02-13-2006 01:21 AM
Hi,
I'm looking for a solution to allow ipv6 clients to access content behind 6509 witch csm. I can't find and examples of possible solution. Can anyone give a hint if it's possible (except using some reverese proxe in front of csm)?
tia
mazek
Solved! Go to Solution.
02-13-2006 04:04 AM
The CSM does not support IPV6, so the routing option is not possible.
You could try bridge mode.
Have the MSFC in vlan XX and the servers in vlan YY and the CSM bridging between the 2.
IPV6 traffic should be bridged accross the CSM with no problem.
Gilles.
02-13-2006 04:04 AM
The CSM does not support IPV6, so the routing option is not possible.
You could try bridge mode.
Have the MSFC in vlan XX and the servers in vlan YY and the CSM bridging between the 2.
IPV6 traffic should be bridged accross the CSM with no problem.
Gilles.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide