the port scan as no impact on communication between msfc and csm.
However, because during the scan you monitor the csm with show commands, there is activity between csm and msfc - just to collect the info you requested from the csm and send it to the msfc for display.
Again, if at that time the csm does not have more important tasks, it can allocate a lot of cpu to the "SLB SendDraco" task.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...