But, as well as the problem with missing ARP?s, we have very slow responses and sites pages are shown with missing objets every time we point to the CSM virtual address with 2 internet proxi servers on a CSM Serverfarm, while if we point to the Real IP Address of any proxi-sever, all is fine and fast.
Now we are pointing directly to real servers (not to the CSM virtual), and all is fine, but it is not the final idea.
It sounds like a problem with the Channel betwen the CSM and the Switch.
We made traces monitoring the PortChannel 260, and we saw very ARP request but just a few replys.
Is very strange that also the CSM is reporting missing ARP?s on Gateways, because this gateway is an interface Vlan into the MSFC!! The only way to disappear the log missing ARP messages is configuring static arp on CSM.
The unmanaged mode is also known as Network only switching, which is introduced in Brazos release. It adds the flexibility for customer to use only network automation for service appliance.
If a device is configured a...
Usually, we can access ESXi Shell by pressing Alt+F1 from ESXi DCUI (Direct Console User Interface).
But on HyperFlex system, it just shows black window.
This is expected behavior because HyperFlex redirects ESXi Shell output to SoL...
Configuring an Export Policy Using the GUI
This procedure explains how to configure an Export policy using the APIC GUI. Follow these steps to trigger a backup of your data:
On the menu bar, choose Admi...