cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
364
Views
0
Helpful
1
Replies

CSM-S "Configuration Sync is not supported by this card"

patrickg
Level 1
Level 1

This is the message everytime I try to sync the cards.

NETCSP01#hw-module contentSwitchingModule 5 standby config-sync

Configuration Sync is not supported by this card

NETCSP01#

The are both installed into the same 6513.

Here are the configs

module ContentSwitchingModule 4

ft group 1 vlan 400

priority 30 alt 20

!

vlan 200 client

description Client Facing CSM Interface

ip address 192.168.100.6 255.255.254.0 alt 192.168.100.7 255.255.254.0

alias 192.168.100.8 255.255.254.0

!

vlan 100 server

description Server Facing CSM Interface

ip address 172.18.10.6 255.255.254.0 alt 172.18.10.7 255.255.254.0

alias 172.18.10.8 255.255.254.0

module ContentSwitchingModule 5

ft group 1 vlan 400

priority 20 alt 30

I am running the following version

Cisco Internetwork Operating System Software

IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXE4, RELEASE SOFTWARE (fc2)

What am I missing?

Thank you!!

1 Reply 1

mchin345
Level 6
Level 6

The configuration synch feature is supported from CSM-S version 2.1.1. I suggest you upgrade your device for using that feature.