Hi all, I implemented a csm-s in bridge mode in an existing environment for http loadbalancing. Everything is working fine until a client requests a reporting feature at the webservers. The webserver starts a java application which opens a connection to the virtual address of these same webservers but this connection will not work.
First of all i thought, that the reply has to go to the csm and configured nat client for the vserver. But still no data coming back. The default routing for the webservers pointing to the csm address.
If I let me show the connection entry I can see a established conn for the client to the webserver. For the webserver outgoing connection I see a connection in REQ_WAIT state and nothing comes back to the client. As attachment my configuration for the csm. Any ideas why the traffic does not come back to th eclient? Should this plan work? Is a connection from the real webserver on the server vlan to a vserver at the csm possible? Thanks for any ideas or help in advance, Thomas.
many thanks for your advice. The vserver matching vlan 70 works perfect now. The question is, why I have to configure a vserver just for vlan 70. Shouldn't the other solution work either??? Anyway, tanks a lot for your help :o)
The unmanaged mode is also known as Network only switching, which is introduced in Brazos release. It adds the flexibility for customer to use only network automation for service appliance.
If a device is configured a...
Usually, we can access ESXi Shell by pressing Alt+F1 from ESXi DCUI (Direct Console User Interface).
But on HyperFlex system, it just shows black window.
This is expected behavior because HyperFlex redirects ESXi Shell output to SoL...
Configuring an Export Policy Using the GUI
This procedure explains how to configure an Export policy using the APIC GUI. Follow these steps to trigger a backup of your data:
On the menu bar, choose Admi...