CSM-S time/date

[orbana]

I noticed that the CSM module uses different time/date settings than the router.

Is there a way to synchronize the CSM's clock to the router.

Thanks,

Attila

dplexdmz-6509-1#sh clock

11:29:17.246 CET Fri Feb 17 2006

dplexdmz-6509-1#sh mod csm 1 probe real

real = 192.168.7.48:80, probe = APOLLOTEST, type = script,

vserver = TEST, sfarm = TEST

status = OPERABLE, current = 11:06:26 CET 01/17/70,

successes = 3714, last success = 11:06:31 CET 01/17/70,

failures = 211, last failure = 00:51:33 CET 01/17/70,

state = Server is healthy.

script APOLLO

last exit code = 5000

last error: 65534

error info: couldn't open socket: connection refused

while executing

"s

[colin.mccrory]

I have enabled ntp on the cat6k using a server as the source and the CSM has synchronised to the system clock. This is also true for the SSL daughtercard on a CSM-S.

[orbana]

The router and the SSL daughtercard is already configured to use NTP (I forgot to mention). If CSM logs to the system log uses the correct time. The anomaly is visible only with some commands (sh mod csm 1 tech all, sh mod csm 1 probe real etc.)

Regards,

Attila

[Gilles Dufour]

do you have the command "clock calendar-valid".

This is required for the CSM to synch with the MSFC.

Gilles.

[orbana]

Thanks. I added "clock calendar-valid" to the configuration but the problem still exist. Do I need to reset the CSM?

Attila