11-22-2007 03:04 AM
Doing a config for client to server looks straight forward, but not clear on the other direction, as in, if a conectiion gets initiated from server to outside - server to client
Do I need to NAT? or Will it just use the virtual address I define in the other direction as its source?
Is there any configuration example?
11-22-2007 07:28 AM
if you need to nat a connection opened by the server, look for the 'static nat virtual' command.
Gilles.
11-22-2007 01:25 PM
Gilles,
Thanks.
Is there an example config somewhere or do I just look in the software configuration guide.
Regards
Alphonse
11-22-2007 09:02 PM
11-23-2007 01:05 AM
your config looks good.
Get a sniffer trace of the csm portchannel so we can see what the csm does with your real server initiated conection.
Gilles.
11-25-2007 06:45 AM
Gilles,
Sniffer trace shows the real serve's IP address sending the ping, but no ping from the nat'ed IP address. My customer did the trace. He did not send me the trace, but he is saying that he can see two packets from the real server's IP address for every ping. Why two?
11-25-2007 06:25 AM
Could I be hitting caveat CSCeh81925 But I have only one gateway on client side.
11-25-2007 06:25 AM
My customer is running an old code - 2.1(3).
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: