Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

CSM - show run module # - diagnostic not supported

Hi, I´d like to know why show run module # (where is CSM) doesn´t show anything that I´ve configured before. I have CSM 3.1(5) and IOS 12.1(19)E1 with SUP2 MSFC2. Is this supported or a Bug ?

I also would like to know if it´s normal to appear not supported CSM module (6) when I use the command show module. This is because I can use CSM without problems. Is this supported or a Bug ?

Router#show module

Mod Online Diag Status

--- -------------------

1 Pass

3 Pass

4 Pass

6 Not Supported

Thank you !!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CSM - show run module # - diagnostic not supported

only supported in SX version.

Gilles.

3 REPLIES
Bronze

Re: CSM - show run module # - diagnostic not supported

Hi,

online diagnostics are not supported for CSM as far as I know. Have you ever configured the CSM? What appears if you do a sh run?

Regards,

Joerg

Re: CSM - show run module # - diagnostic not supported

Hi Joerg,

There´s no problem with show run if you want to see CSM configuration, but if you use IOS 12.2(14)SX1 with SUP720 you can use the command show run module # (where is CSM) and appears what you want.

I ´d like to know if this command is not supported with SUP2 and IOS 12.1(19)E1 or if it is a cosmetic Bug. I was searching in the Bug Toolkit and Release Notes and I didn´t find anything about it.

Could you give me a link where I can see "online diagnostics are not supported for CSM" ?.

Thank you.

Cisco Employee

Re: CSM - show run module # - diagnostic not supported

only supported in SX version.

Gilles.

242
Views
0
Helpful
3
Replies