Hi, I have tried to configure the backup serverfarm on CSM to provide sorry server service for my primary serverfarm. Following are the configuration I had:
virtual 126.96.36.199 tcp www
serverfarm TT backup SorryTT
I expected when all of the real servers in serverfarm TT went down, all of the http traffic to 188.8.131.52 will be redirect to the real server 184.108.40.206 in Serverfarm SorryTT. But looks like it's not working.
Or is there anyway we can configure the http redirect when all of the server in one serverfarm are all dead? The Cisco's configuration guide is not very helpful.
Whenever the primary serverfarm is down (all its vservers have failed or are down), the CSM will start using the sorry serverfarm servers to serve requests to the vserver. The configuration looks fine to me. Are you receiving any error messages ?
Can you enable debug messages and try to see what the problem could be.
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...