Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CSM trunks oversaturated?

We have a CSM 4.1.6 in Hybridmode we noticed on the switch that the top talkers were maxing out 100% on one of the 4 trunks to the CSM it randomly changes ports steadily @ 100%. So my question is why doesnt the CSM use all trunks equally?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: CSM trunks oversaturated?

I'm using native mode but in Your case maybe this will help:

set port channel all distribution {ip | mac | session} [source | destination | both]

br

3 REPLIES
New Member

Re: CSM trunks oversaturated?

try to choose different balancing method aproptiate for Your traffic:

port-channel load-balance ?

dst-ip Dst IP Addr

dst-mac Dst Mac Addr

dst-port Dst TCP/UDP Port

mpls Load Balancing for MPLS packets

src-dst-ip Src XOR Dst IP Addr

src-dst-mac Src XOR Dst Mac Addr

src-dst-port Src XOR Dst TCP/UDP Port

src-ip Src IP Addr

src-mac Src Mac Addr

src-port Src TCP/UDP Port

hth

Marcin

New Member

Re: CSM trunks oversaturated?

Thanks for the quick response Marcin but it doesn't seem to like the command on CATOS both SUP & MSFC. Is there another way to apply it?

New Member

Re: CSM trunks oversaturated?

I'm using native mode but in Your case maybe this will help:

set port channel all distribution {ip | mac | session} [source | destination | both]

br

136
Views
0
Helpful
3
Replies
CreatePlease to create content