I have inherited a used Cisco Css 11000 from a friend. I am trying to set up a test environment to get a jump on my classes this upcoming semester. So far I have had no problems setting it up to load balance connections between four "servers".
But i started to notice something rather strange with it the other day. One server is getting alot more connections then the other three when i test. Here are the stats
Service State Conn Weight Avg load
test1 Alive 22 1 2
test2 Alive 52 1 2
test3 Alive 15 1 2
test4 Alive 142 1 39
So when i take test4 out of that content group the other three servers load balance fine. It is just when that one is in there does it do this.
Does anyone have any ideas on what it might be? Because I am totally lost.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...