04-12-2006 04:43 PM
hi gilles and everyone
gilles, yesterday i tested your suggestion and now working well
thanks for your help
i have an other question today.
css 11050 cpu utilization 100% after configuing the " sticky-inact-timeout " command in telnet content.
before configuring the command
cpu utilization is just 4%
content telnet_slb
vip address 1.1.1.66
add service 1
add service 2
add service 3
protocol tcp
port 23
sticky-inact-timeout 600
active
CSS11050# sh system-resources
System Resources:
Installed Memory: 134,217,728 (128 MB)
Free Memory: 29,654,448 (28 MB)
CPU: 100%
Buffer Statistics:
Buffer Pool: 0
Size: 256 Total:1000 Available:1000 Failures: 0 Low Buffer Count: 741
Buffer Pool: 1
Size:1600 Total:9000 Available:8311 Failures: 0 Low Buffer Count: 8095
now i ajusted "sticky-inact timeout 10 "
but cpu utilization dont go down.
advise to me plz..
thanks
Solved! Go to Solution.
04-13-2006 04:28 AM
you do not have stickyness configured on this rule, so you don't need this command.
If you want stickyness, use the command 'advanced-balance sticky-srcip'.
So go ahead and remove the 'sticky-inact timeout' command.
Gilles
04-13-2006 04:28 AM
you do not have stickyness configured on this rule, so you don't need this command.
If you want stickyness, use the command 'advanced-balance sticky-srcip'.
So go ahead and remove the 'sticky-inact timeout' command.
Gilles
04-16-2006 03:29 PM
thanks very much! gilles
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: