Does anyone know how to perform a full factory reset on CSS 11500 series kit (specifically at this point in time the CSS 11503)? I am writing config guides to take "Out of the box" CSS 11503's and configure them from scratch.
To fully test the documentation I need to reset the CSS 11503's to the same configuration that they come out of the box with, i.e. prompts with the Cisco licence agreements etc.
Erasing the startup-config goes partway to acheiving this but not the whole way.
I was advised to try the "delete nvram" command by a colleague but this command doesn't exist (or seem to) on the CSS.
Does anyone know how to fully clean and reset a CSS to its "out of the box" configuration (what I call a Factory Reset).
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...