Css 11500

[gaban]

We bought 2 css switches so we can do redundancy but when I boot up the other switch it goes directly to OFFDm. The other one boots up fine to the Cli prompt. I am new to this appliance. Am I missing some kind of config?

Thanks,

gilbert

[pknoops · Accepted solution]

Gilbert,

In the OffDM, check to make sure the boot setup is configured for D - disk and select the code. It may still be configured for N - network.

Also make sure there is atleast one flash card in the pcmcia slot. If so, you can also move the card to the other slot and boot.

Regards

Pete Knoops

Cisco TAC

[gaban]

Thanks Pete!

THe Card was not inserted properly and I had to point it to boot to Disk.

Thanks again