Hey, got a question here about configuring load balancing to backend SSL servers. Basically there are two backend servers, if a user hit ine we want them to stick to that server for their session, but we want connections comin in to be load balanced between the two servers. HTTP traffic works fine, it balances between the servers and if one server is down, the traffic goes to the other. With the SSL traffic though, the traffic only goes to one server, if that server is down, it nevers goes to the other one. I pasted the config below, any help would be great.
I sort of got this handed to me last minute and have had zero experience with these switches until last Friday. We hired a consultant to program it but he had no idea what he was doing so it got handed to me. Sorry if the config is a little confusing, im still learning. Thanks
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...