Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CSS 11501

we have a Cisco Content Services Switch model 11501 that load balances between 4 application servers. The credit card module a component of the application servers mysteriously stopped working. When we put a trace on the line we observed multiple transactions coming from an unknown device. The Mac Address is 00-13-c3-2a-43-ab. The Cisco Content Services switch has a Base Mac Address of 00-13-c3-2a-43-a8. I need to know what IOS command will identify which Mac address are assigned to which Ethernet port.

I would appreciate if somone could help me on this.

Thanks

9 REPLIES
New Member

Re: CSS 11501

Try the "show arp" m8.

or show arp ? for more options.

Is an Cisco IP Address for Sure.

MAC Address

Prefix Vendor

0013C3 Cisco Systems

http://www.coffer.com/mac_find/

Best Regards,

Petr?nio

New Member

Re: CSS 11501

Hi Thanks for yours prompt reply.

Is there any other IOS commands which helps us in this case?

New Member

Re: CSS 11501

Hi Petronio,

I just want to clarify it. Did you mean "show arp m8" ; just wanted to know whts this m8 all about.

Best Regards,

Arindam

New Member

Re: CSS 11501

Heheh, no

the "m8" is only a aberviation for "mate" .. ehhehe, and is not part of the command.

;)

New Member

Re: CSS 11501

I really dont know any other on CSS.

But, it doesnt identify the IP with "show arp" ?? In the last column it says on which port is seen.

Example:

CSS_2# show arp

ARP Resolution Table:

IP Address MAC Address Type Port

10.1.1.80 00-de-ad-be-ef-04 dynamic e9

10.1.1.90 00-de-ad-be-ef-05 dynamic e9

10.1.1.101 00-14-5e-1c-a8-f0 dynamic e9

10.1.1.110 00-0b-db-e7-a0-a0 dynamic e9

10.1.1.112 00-14-5e-7b-41-1c dynamic e9

10.1.1.120 00-14-5e-7b-41-24 dynamic e9

10.1.1.121 00-14-5e-7b-41-3c dynamic e9

10.1.1.122 00-14-5e-7b-41-1e dynamic e9

10.1.1.123 00-14-5e-7b-41-0c dynamic e9

10.1.1.124 00-14-5e-7b-41-3a dynamic e9

10.1.1.125 00-14-5e-1c-a9-3e dynamic e9

10.1.1.126 00-16-35-65-1d-e7 dynamic e9

10.1.1.174 00-0b-db-e7-93-35 dynamic e9

10.1.1.175 00-14-5e-c5-a0-40 dynamic e9

10.1.1.177 00-19-bb-3e-8b-ee dynamic e9

10.1.1.178 00-19-bb-33-88-46 dynamic e9

10.1.1.190 00-30-05-98-9c-c0 dynamic e9

10.1.1.191 00-1a-4b-4a-0e-46 dynamic e9

10.1.1.192 00-1a-4b-e5-85-3e dynamic e9

10.1.1.251 00-03-ba-06-e8-38 dynamic e9

10.1.1.252 00-03-ba-06-e4-64 dynamic e9

10.1.1.254 00-03-ba-06-e8-38 dynamic e9

10.1.2.1 00-1b-0c-82-ac-a5 dynamic e2

10.1.2.252 00-03-ba-06-e4-61 dynamic e1

10.1.2.253 00-03-ba-06-e8-35 dynamic e1

10.1.2.254 00-03-ba-06-e8-35 dynamic e1

With the "show chassis " command, u could sees the Base Mac Address of the equipment.

Best Regards,

Petr?nio

New Member

Re: CSS 11501

lolz sorry for "m8" confusion!! :)

Ah I guess this is what I was looking for. Will let you know if this really works out for me.

Thanks.

Best Regards,

Arindam

New Member

Re: CSS 11501

Hello,

If you want to know the mac addresses for the interfaces run this command:

CSS# show miibi

And if you need to know the mac address of the CSS, you can use this command:

CSS# llama

CSS(debug)# ip if

Hope this help.

- Rodrigo

New Member

Re: CSS 11501

Hello Rodrigo,

Could you please confirm the command again.

is it "show rniibi" ??

New Member

Re: CSS 11501

Hi,

Sorry, the command is:

CSS# show mibii.

-Rodrigo

366
Views
5
Helpful
9
Replies