Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CSS/ACE response time for HTTP 200 ok

Hi,

Is there any show command available for CSS/ACE to display eg. HTTP 200 response time per client request.

Our SLA is to serve HTTP200 within 1 sec after the 1st request is send to web server from the CSS/ACE

My search on this forum suggest sniffer. Any other alternative.

Kelvin

1 REPLY
Cisco Employee

Re: CSS/ACE response time for HTTP 200 ok

Are you trying to make sure the ACE/CSS does not delay the response ?

Or do you want the ACE/CSS to detect if the server is too slow to respond ?

On the ACE you can set a probe max response time to 1sec and if the response does not come within this time, the probe goes down.

The command on ACE, under the probe config is :

receive Configure max time to wait inorder to receive reply from server

Otherwise, the sniffer trace if you just want to have a look and make sure about the time.

Gilles.

136
Views
0
Helpful
1
Replies