Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CSS - Akonix IM filtering

I recently implemented an L3 content rule for Akonix IM filtering servers. Users have an ISA client that connects to an ISA server, the ISA server connects to the Akonix server, and the Akonix server connects to the destination IM. When the ISA -> Akonix connection is direct to a server, there are no problems. When the ISA connects to the new VIP, the sessions get dropped roughly every 52 minutes.

Any quick thoughts on how to troubleshoot this? Or experience with this type of problem or this application?

Here's my config:

content hoeimg40

vip address x.x.x.x

advanced-balance sticky-srcip

sticky-mask 255.255.240.0

sticky-inact-timeout 60

add service hoeimg41

add service hoeimg42

active

service hoeimg41

ip address x.x.x.x

keepalive type tcp

keepalive port 7080

active

service hoeimg42

ip address x.x.x.x

keepalive type tcp

keepalive port 7080

active

Any other information needed?

1 REPLY

Re: CSS - Akonix IM filtering

you have to change the flow timeout multiplier and make it bigger using "flow-timeout-multiplier" command under content rule.

224
Views
0
Helpful
1
Replies