Pursuant to a previous post I made about using the CSS as a proxy for our web servers, one solution proposed was to utilize the reverse-proxy functionality of the CSS. One issue I have with this setup is that we don't need the extra proxy servers such a setup would entail.
What we wanted to accomplish originally was to have the CSS act purely as a proxy so that the client never contacts the web servers directly. How would such a setup be configured? Also, can anyone recomment a Cisco press book that documents the commands and functionality of the CSS series switches? Thanks.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...