Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Cisco Employee

CSS & CE 507 Reverse Proxy Cacheing

I am trying to set up a CSS and CE507 to perform reverse proxy cacheing. I can not get the Cache to respond back. The link on CCO is way old and doesn't offer any helpful information. I pretty confident on the CSS config, my trouble is with the CE. The CE is on a different L3 network than the origin server. The CSS & the CE are located behind an Internet PIX. I've set the CSS service for proxy and I've set my 4.1 ACNS CE to use proxy for my associated domains. Please help..........,

2 REPLIES

Re: CSS & CE 507 Reverse Proxy Cacheing

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

Cisco Employee

Re: CSS & CE 507 Reverse Proxy Cacheing

Take a look at the following Tech-tip that I wrote:

http://www.cisco.com/warp/public/117/CSS_CEreverseproxy.html

In order for this to work you need to configure the service as a type transparent-cache and ensure that you have 'no cache-bypass' configured as well. On the Cache, you need to ensure that you have 'http l4-switch enable' and either an http outgoing proxy statement that

points to the webserver's VIP (in my example the cache_request_rule) or a rule that does the same.

149
Views
0
Helpful
2
Replies