Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CSS & Certificates - Multipart Question

I generated request on CSS using gencsr. Sent it to CA. CA sent 4 certs: CA Root, Verisign, domain. Question 1: I just need to upload the domain cert right?

While uploading the option i have is pem or pkcs#12. The cert sent was in .crt format. Which should I use?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CSS & Certificates - Multipart Question

The only certificate that needs to be uploaded to the CSS is the server certificate, so you are right. Also .crt is just the extension (certificate), the real format is PEM or PKCS12, that would depend on where did you created the CSR, on this case, since you created on the CSS itself this is a PEM, if you would do it on a Microsoft environment it would probably be PKCS12.

So select PEM to upload the file from the FTP server.

Hope it helps!!

1 REPLY
Cisco Employee

Re: CSS & Certificates - Multipart Question

The only certificate that needs to be uploaded to the CSS is the server certificate, so you are right. Also .crt is just the extension (certificate), the real format is PEM or PKCS12, that would depend on where did you created the CSR, on this case, since you created on the CSS itself this is a PEM, if you would do it on a Microsoft environment it would probably be PKCS12.

So select PEM to upload the file from the FTP server.

Hope it helps!!

355
Views
0
Helpful
1
Replies