Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CSS code updgrade procedure

Hi,

A bit a newbie question. I'm running a few 11501's and 11503's, they're all running the following code:

CSS11503# sh ver

Version: sg0810106 (08.10.1.06)

Flash (Locked): 08.10.1.06

Flash (Operational): 08.10.1.06

Type: PRIMARY

Licensed Cmd Set(s): Standard Feature Set

Can someone point me to a link/doc/procedure on how I go about upgrading to 8.20 code.

Is it a lengthy procedure ?

Are there any gotchas or tip/tricks I should watch out for ?

Thank you,

Manjit

3 REPLIES

Re: CSS code updgrade procedure

Please use the folloiwng link to upgrade CSS.

I prefer manual upgrade

http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/c

ss11500series/v8.10/configuration/administration/guide/Upgrade.html#wp1012126

Just in case if upgrade fails then you can recover CSS using the link

http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note0918

6a008009436b.shtml

HTH

Syed Iftekhar Ahmed

Community Member

Re: CSS code updgrade procedure

Thanks for the links. Can you point where on website I can find the code:

I see some CSS reference in "Application Networking Software" but nothing for the 11501, 503's.

Any ideas ?

Application-Oriented Networking Software

Application Networking Software

Broadband Cable Software

Router Software

Cisco IOS Software

CiscoWorks Software

Contact Center Software

Interoperability Systems Software

Network Management Software

Optical Networking Software

Security Software

Server Networking & Virtualization Software

Storage Networking Software

Switches Software

TelePresence Software

Universal Gateways and Access Servers

Video and Content Delivery

Voice Software

VPN Software

WAN Switching Software

Web Software

Wireless Software

Community Member

Re: CSS code updgrade procedure

On this page, select "Application Networking Software".

On the next page, select "Cisco WebNS (CSS 11500 series)" beneath the heading "Data Center Application Optimization".

On the next page, select "Major, Minor and Maintenance Releases".

On the next page, select "sg0820201.adi-gz".

Then follow the instructions included at the links in the post above.

I also recommend performing a manual upgrade, but you should also perform an automated upgrade to become familiar with this option.

199
Views
9
Helpful
3
Replies
CreatePlease to create content