CSS config not getting syn with commit_VIPRedundConfig script.
Hi All, I am having issue with synchroniztion between Active and backup ContentSwitch via commit_VIPRedundConfig script.
CSS11506# commit_VipRedundConfig "-d" CSS11506# Checking available disk space on systems ... Checking the disk space locally before continuing with the script. Verifying that another local session is not running the script. Creating script/vipr_config_sync_lock file. Verifying app and redundancy configs ... Verifying that app session is up with backup switch. Making sure app session is up. Seconds to wait before calling it quits: 60 Checking the disk space remotely before continuing with the script. Checking local and remote switch versions ... Storing the running code versions of the local and remote switch. Storing the local switch's version. Retrieving the remote switch's version. Checking remote version for 4.0 Checking if switch is BACKUP for any virtual routers and if the state is 'No Service'. Checking vip redundancy state ... Working ... Checking if backup switch is Master for any VRIDs. If it is, either a local interface that once held redundant vips has been removed or the Backup is a Master for another vip-redundant relationship. Checking remote redundant vips ... Saving Master running-config to startup-config and archiving startup-config. Copying running-config to startup-config. Archiving startup-config. Swapping Master and Backup ip addresses in tmp.cfg for app and redundancy interface. Checking for multiple APP sessions between redundant peers. App Session IP: 188.8.131.52, Local IP address: 184.108.40.206 Checking IP Address size differences : <220.127.116.11> <18.104.22.168> Adding APP session IP length difference to LOCALCONFIG byte size : 0 Adding APP session IP length difference to REMOTECONFIG byte size : 0 Removing CIRCUIT and INTERFACE modes from tmp.cfg. Checking for SSL configuration ... Working ... Using rcmd to copy tmp.cfg to a file on Backup switch. Archiving copy to Backup's startup-config. Archiving Backup's current startup-config. Restoring startup-config (new copy) to startup-config. Clearing running-config. Script playing the copy script of the Master's running-config. Checking to make sure backup App goes down Making sure app session is down. Seconds to wait before calling it quits: 1256 Copy success being verified by comparing byte sizes of archived running- configs of the Master switch and the Backup switch. Making sure app session is up. Seconds to wait before calling it quits: 679
End of the synchro after a loooong timeout: Seconds to wait before calling it quits: 1 Stand By Switch's app session is not up. Check for script commit_failure on the Backup.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...