content PR-443 add service ssl vip address 10.10.1.1 application ssl protocol tcp port 443 url "/*" active
content PR-80-ddo-for vip address 10.10.1.1 add service efg add service hij protocol tcp port 80 url "/FoR*" advanced-balance arrowpoint-cookie arrowpoint-cookie browser-expire arrowpoint-cookie name for80 active
content PR-80-ddo-pcm add service xyz add service abc arrowpoint-cookie browser-expire protocol tcp port 80 url "/PCM*" vip address 10.10.1.1 advanced-balance arrowpoint-cookie arrowpoint-cookie name pcm80 active
content PR-8443-any add service baker add service bond vip address 10.10.1.1 advanced-balance arrowpoint-cookie arrowpoint-cookie browser-expire protocol tcp port 8443 url "/*" active
content PR-443-FoR add service efg add service hij vip address 10.10.1.1 arrowpoint-cookie browser-expire advanced-balance arrowpoint-cookie protocol tcp port 8443 url "/FoR*" arrowpoint-cookie name FoR443 active
content PR-8443-PCM add service xyz vip address 10.10.1.1 add service abc arrowpoint-cookie browser-expire advanced-balance arrowpoint-cookie arrowpoint-cookie name PCM443 protocol tcp port 8443 url "/PCM*" active
content forhttps add service efg add service hij advanced-balance arrowpoint-cookie arrowpoint-cookie browser-expire url "/for" protocol tcp port 8443 arrowpoint-cookie name for443 vip address 10.10.1.1
content forredirect url "/for" protocol tcp port 80 vip address 10.10.1.1 advanced-balance arrowpoint-cookie arrowpoint-cookie browser-expire arrowpoint-cookie name smallfor add service FoR-redirect
now its getting difficult for users and they need it not to be case sensitive
on load balancer above is configured the content rule forredirect the redirect works , user can login but within the page there is a link which takes the user to https://www.tptp.com/PCM there is a content rule as you can see when /PCM is seen to forward the requests to services xyz and abc. these are webservers but once the user logs in with /for and clicks on the link which has /PCM browser just waits and eventually no response
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...