I noticed in CSS11500 documentation Cisco advice not using level 2 devices for Inter-Switch Communication (see at link at the end). After sniffing, it appears ISC works with broadcasted ethernet frames.
So how should we proceed to link two redundant content switch distant from several kilometers ?
My problem is, in spite of cisco recommandations, I've linked CSS through two C65xx. Link works but become down for a very short time periodically (each 10 minutes).
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...