Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CSS on multiple subnets and separate load balancing

Hello,

I've a situation where I need to load balance incoming clients on subnet A to 3 real servers on subnet B - no problems there.

But I also need to load balance different clients on subnet C to 3 other servers on subnet D and clients on subnet E to 2 servers on subnet F.

Basically I want to use the CSS for 3 different load balancing operations.

Rather than using 3 separate CSS11503s can I do all this with multiple VLANs on the LAN switches and 1 CSS?

Any help appreciated

Regards Tony

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CSS on multiple subnets and separate load balancing

you can have as many vlan as you want.

So yes you can do what you want.

Just be aware that the CSS can route as well between those vlans, so if you separation between them you may have to use ACL.

Gilles.

2 REPLIES
Cisco Employee

Re: CSS on multiple subnets and separate load balancing

you can have as many vlan as you want.

So yes you can do what you want.

Just be aware that the CSS can route as well between those vlans, so if you separation between them you may have to use ACL.

Gilles.

Community Member

Re: CSS on multiple subnets and separate load balancing

Excellent, many thanks Gilles for the speedy reply, I'll be happy to give this a top rating

Cheers mate

Tony

237
Views
0
Helpful
2
Replies
CreatePlease to create content