I need the ability to have a single server in a one armed configuration separated by an ASA5510. From what I understand, this is possible by natting the source address in the CSS so the return traffic from the server will flow through it. Question is, how do I get the initial request to flow to the CSS with my static in the firewall? Any request from the outside will go directly inside. I'm obviously missing something here.
I have looked through the documentation you posted previously on zones, but am not sure how to go about switching from my current GSLB setup. Will my current GSLB setup remain the same, the only thing that changes is the way the dns works?
I suppose moving to zone based will make my current site redundancy setup not function properly. I don't see any way to use zone based dns and have the decision based upon content rules like you can do with rules based dns and an acl.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...