Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CSS - Packet trace

Hi sirs,

I need to know if someone can help me with the meaning of the options of the flow options command under the llama (debug) mode. On the CCO I found only the 0x103, are there other options? What's their meaning?

Thx

davide

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CSS - Packet trace

there is none.

The CSS does not offer this functionality.

The ACE module does.

Gilles.

5 REPLIES
Cisco Employee

Re: CSS - Packet trace

CSS11503-2(debug)# flow options ?

00000020 Trace Route Changes

00000010 Simulate DOS Attack

00000008 Trace Spoof List

00000004 Trace Source IP Address

00000002 Trace UDP Flows

00000001 Trace TCP Flows

CSS11503-2(debug)# flow options

New Member

Re: CSS - Packet trace

Thanks,

but I need to know if there is a command which output is similar to the show flows, becuse the flow option 0x103 give me so much information that I don't need to have.

Thanks

Cisco Employee

Re: CSS - Packet trace

I feel like you're trying to find a way to log an entry for each connection you get.

Some logging functionality.

We do not recommend to use the flow trace for that.

This is a debugging tool, and should only be used to trace issues and should be turned off once the problem has been resolved.

Gilles.

New Member

Re: CSS - Packet trace

Hi Gilles,

thanks for your suggestion, do you know which is the logging command to use for our purpose?

Bye

davide

Cisco Employee

Re: CSS - Packet trace

there is none.

The CSS does not offer this functionality.

The ACE module does.

Gilles.

369
Views
0
Helpful
5
Replies