I have a one armed network configuration of my CSS. I had four web servers which are being load balanced. These web servers in turn connect to two billing servers. The Clients are able to access the web server but when they try and access the billing information then the connection gets disconnected. Is there anything we can do.
From your config it looks like two of the four web servers are also being used as data repositories server(s). Is there multiple IP address bond to those server(s)? You?ve created a basic content rule that only tells the CSS port 80. Also you may be sending all the traffic to one server, since you haven?t specified a balance type (balance srcip) in the content rule. Depending on your configuration you might look at creating another content rule and group for the data portion. Since your running one arm, I assume there is a lot of network variables involved, just a thought.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...