I must configure our CSS to use a GeoTrust SSL wildcard cert covering 3 domain levels, i.e., "*.abc.com", "*.*.abc.com" and "*.*.*.abc.com".
We generated the CSR from the CSS using "*.abc.com" for our domain name since you can only make one entry there. When the CSR is sent to GeoTrust, they configure the SSL wildcard cert to use all 3 wildcard domain names (you can see all 3 domain names in the cert we received back from GeoTrust).
We applied the SSL wildcard cert received from GeoTrust on the CSS and the key & cert match. However, when we hit the webpage using "web.login.abc.com" we get a popup warning that the site name does not match the cert... but the "*.*.abc.com" entry in the cert should cover this... right?
So, my question is... what domain name should I be entering during CSR generation on the CSS to cover this SSL wildcard cert?
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...