03-31-2006 08:06 AM
Hi
CSS 11800 with Version 6.10
When I do debug I am unable to get the timestamp .Any specific command to be configured?
Carrying out Flow trace-ip xx and flow options ox2 and logs are not showing any message about the time it is happening.
Thanks & regards
R.Sundara Rajan
04-01-2006 01:47 AM
nothing special to do.
If you have no time, this is a log with no time stamps.
G.
04-01-2006 04:10 AM
Hi,
Date format European is enabled. Even then I dont get any timestamps on the logs when i do a debug.
regards
R.Sundara Rajan
04-03-2006 01:42 AM
as I said, there is no timestamps for this particular debug messages.
Since this is debug, you should be watching the screen when the event occurs and know when it happened.
You should not let this debug command run as logging feature.
Gilles.
04-03-2006 05:01 AM
Hi
This is what i get on the debugs .
FLOWMGR-4: UDP out 10.247.250.1:1813->172.30.12.5:1813
FLOWMGR-4: UDP in 172.30.12.5:49291->172.30.11.27:1813
FLOWMGR-4: UDP out 172.30.12.5:49291->172.30.11.27:181
I did a debug for flow trac-ip x.x.x.x
flow options 0x02
Anythoughts.. to get the timestamp in this debug?
regards
R.Sundara Rajan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide