Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CSS to ACE migration

I am in the process of Migration all servers from our Content switch to CIsco ACE4710.

one content has this line item

advanced-balance sticky-srcip

What would be similar option in ACE.?

Thanks for any help on this.

Mehdi

2 REPLIES
Bronze

CSS to ACE migration

Hi,

you can go with "sticky source" option in ACE where in you bind the serverfarm,

check for ace configuration guides for sticky serverfarm and source based sticky.

CSS to ACE migration

Hello,

Here you have a sample about it:

rserver host SLB-1

  ip address 10.198.16.100

  inservice

serverfarm host SLB

  rserver SLB-1

    inservice

sticky ip-netmask 255.255.255.255 address both ACE-SLB

  timeout 10   

  timeout activeconns

  serverfarm SLB

policy-map type loadbalance first-match SLB-Policy

  class class-default

    sticky-serverfarm ACE-SLB

Here you have a document about it:

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/configuration/slb/guide/sticky.html

Some of feature under the sticky group may vary based on your requirements but besides that, the sample above is what you could be looking for.

Jorge

438
Views
0
Helpful
2
Replies
CreatePlease to create content