Incase I have all the users coming in through a proxy server then I would have only one Source IP address. Is there a possibility of load sharing based on the users and have sticky session enabled based on the user who initiated the connection
If an application requires that a user be stuck for the entire session, use Layer 3 sticky, which sticks a user to a server based on the user's IP address.
If a large percentage of your customers come to you through a mega-proxy, then consider using a different sticky method (for example, the
advanced-balance method cookies, and cookieurl url).
vip address 188.8.131.52
add service server1
add service server2
ip address 10.0.3.221
ip address 10.0.3.222
The cookie is entered by using the 'string' command.
The service is then added to the Content Rule.
Enables the content rule to stick the client to the server based on the configured string found in the HTTP cookie header. You must specify a port in the content rule to use this option. The CSS will then spoof the connection. A content rule with a sticky configuration set to advanced-balance cookies requires all clients to enable cookies on their browser.
When a client makes an initial request, they do not have a cookie. But once they go to a server that is capable of setting cookies, they receive the cookie from the server. Each subsequent request contains the cookie until the cookie expires. A string in a cookie can be used to stick a client to a server. The service mode string command enables you to specify where the CSS should locate the string within the cookie.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...