cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
493
Views
0
Helpful
2
Replies

CSS11150 Fail to Boot

hnrane
Level 1
Level 1

Hi! One of the CSS11150 in our production CSS Pair has failed. If we reboot the box it displays following:

Enter the number of a menu selection:

Enter the number of a menu selection:

1* Set Boot Configuration

2. Show Boot Configuration

3* Advanced Options

4. Reboot System

> 4

Are you sure you want to reboot? (y/n)y

Rebooting....

BootRom...booting

Copyright 1998 (c), Cisco Systems, Inc

Locked boot flash.

Validating operational boot flash, please wait...

Operational boot flash valid. Jumping to operational boot flash.

Copyright 1998 (c), Cisco Systems, Inc

Operational boot flash.

Version 5.00 Build 105

PN: 073-05857-02 Rev: F0.0 SN: 21480063251

Running POST Diagnostics

<2><3><4><6><7><8><12><14><15><28><31><32><33><34><38><44><45><46><48><49><76><78>

<96><99><101><103><105><107><109><111><113><115><117><119><121><187><188><190><192

><194><196><198><200><202><203><204><206>

XPIF 3 device version: 0x3001

POST Diagnostics PASSED

Booting into Offdm image at 0xbfd80000

CSS 11150 Offline Diagnostic Monitor menu, Version: 5.00 Build 105

Reading configuration records...NVRAM Device Test failure @ 3344

FAILED M A I N M E N U

Checking previous shutdown..UNKNOWN

InitialiEnter the number of a menu selection:

1* Set Boot Configuration

2. Show Boot Configuration

3* Advanced Options

4. Reboot System

>

It seems like the CSS has a problem in the NVRAM somewhere. Has anyone experienced similer problem before? What can we do to fix it?

Thx

2 Replies 2

Gilles Dufour
Cisco Employee
Cisco Employee

you can try to use option #1 to set the boot configuration manually.

If it also fails, this would be an hardware issue and there is nothing else we can do.

Gilles.

Thanks for your reply Giles. I did tried option 1 and setup all the boot configuration. it still fails. I even tried Advanced Options with Dosk verofocation etc. to see the same result.

As you mentioned this looks like a hardware issue. I just wanted to reconfirm this.

Thanks again for your reply