The only thing that needs to be corrected on this doc, is when you create the new "Administrative username", do not use 'admin', use something else like cisco/cisco and then after the box reboots, go in and change the admin username with the 'username' cli command.
When you change the password in the cli, do not forget to put 'superuser' on the end of the command or you will have to do the same procedure all over again.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...