Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CSS11500 adding Redundant Vip

Hi all,

we have a CSS 11503 with rel 7.5 already working in production environment with this piece of configuration:

circuit VLAN14

    ip address 10.128.201.253 255.255.255.128

    ip virtual-router 251 priority 200 preempt

    ip redundant-interface 251 10.128.201.251

    ip redundant-vip 251 10.128.201.153

    ip redundant-vip 251 10.128.201.178

    ip redundant-vip 251 10.128.201.179

    ip redundant-vip 251 10.128.201.144

Now we need adding a new redundant-vip (10.128.201.180); as I read on the configuration guide in order to achieve this I need to switch to 'config-circuit-ip' mode that means:

CSS# conf t

CSS(config)# circuit VLAN14

CSS(config-circuit[VLAN14])# ip 10.128.201.253 255.255.255.128

CSS(config-circuit-ip[VLAN14-10.128.201.253])ip redundant-vip 10.128.201.180 251

Does anyone know if this need of re-entering the Ip for the circuit can introduce some kind of disservice?

Thanks a lot

Chiara

Everyone's tags (2)
657
Views
0
Helpful
0
Replies