Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CSS11801 and service port responses

Is there a way to make the CSS check a service in a content rule to see if a tcp port is responding before sending traffic to it? I have the following setup:

************************************SERVICE**********************

service Sun280R-1

ip address 172.20.14.3

active

service Sun280R-2

ip address 172.20.14.4

active

!*************************** OWNER ***************************

owner TEST

content Sun280R

balance aca

add service Sun280R-1

add service Sun280R-2

vip address 10.1.1.1

active

I'd like to test a tcp port on either of Sun280R services in the Sun280R content rule to make sure that an application is responding before sending traffic to it. Is this possible?

Thank you!!

2 REPLIES
New Member

Re: CSS11801 and service port responses

Hi,

You will need to configure the appropriate keepalive into your service configuration.

For example if you wish to setup a keepalive to check a POP3 service using the basic TCP 3 way hand shake the you would use:-

service Sun280R-2

ip address 172.20.14.4

keepalive 110

keepalive tcp

active

New Member

Re: CSS11801 and service port responses

Ah yes. This does not affect the operation of the service (as in, what protocols can be passed to the service) ?

156
Views
0
Helpful
2
Replies
CreatePlease to create content