Hi, I have two CSSes, one PROD and other TEST. The PROD box has a CSS5-SSL-K9 module, TEST has the CSS5-SSL-C-K9. What we've noticed is download times thru the PROD box is ~285kbps, TEST goes upto 1.3mbps. Both boxes are connected to the same switch/router infrastructure, configuration is almost identical, the only major difference is the type of SSL module.
I realize CSS5-SSL-K9 is end of sale (old, etc...) could the speed difference be due to the fact CSS5-SSL-K9 performs 800-1000 TPS vs 1400 TPS of CSS5-SSL-C-K9. The newer mod also supports HTTP compression.
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...
Cisco Documents are usually accurate, but when it came to the document
on Cisco APIC Signature-Based Transactions it was slightly off the mark.
This document is for those novices to API like me who cant seem to
figure out how to go about performing signat...