I'm having trouble accessing the CVDM on my CSS 11501. I'm just trying to set it up for the first time, so it has never worked before. I've followed the directions in the guide to install the CVDM software, and I have confirmed that it is loaded:
Version: sg0810106 (08.10.1.06)
Flash (Locked): 07.20.2.06
Flash (Operational): 08.10.1.06
Licensed Cmd Set(s): Standard Feature Set
CVDM Version: cvdm-css-1.0
I have also added the 'no restrict web-mgtm' command.
However, when I try and access the CVDM via http://<ip_address> my browser just spins. I have uninstalled all versions of java except for 1.4.2_08. My CSS uses Radius authentication by default, would that affect this?
Depending on the version of CVDM that you installed, CVDM uses Telnet or SSH to make all configuration changes. By default, the CSS does not restrict access to Telnet or SSH sessions. But if you determine that the CSS is configured to restrict access for these sessions, use the no restrict telnet|ssh command to allow access.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...