Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Debug/Packet Trace - flow options on the CSS11501 running 7.20 Build 3

Hello all, I need to do some packet tracing on the CSS11501 running 7.2 and need to limit debugged packets to a particular IP.

I know that you can set the IP by running: "flow trace-ip X.X.X.X"

But what HEX option would I need for the command : "flow options" to only limit the traffic to one IP?

From the help I get this:

flow options ?

00000020 Trace Route Changes

00000010 Simulate DOS Attack

00000008 Trace Spoof List

00000004 Trace Source IP Address

00000002 Trace UDP Flows

00000001 Trace TCP Flows

I tried different options like 0x00000004 and others, but get an error : "%% Invalid hex string entered".

I can only get all TCP packets using " flow options 0x0000001" and that causes all TCP packets being dumped onto the console which risks crashing the CSS device.

Has anyone been able to just dump packets from one particular IP address?

Thank you.

Dmitry.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Debug/Packet Trace - flow options on the CSS11501 running 7.

try option 0x5 (0x4 + 0x1)

Gilles.

2 REPLIES
Cisco Employee

Re: Debug/Packet Trace - flow options on the CSS11501 running 7.

try option 0x5 (0x4 + 0x1)

Gilles.

New Member

Re: Debug/Packet Trace - flow options on the CSS11501 running 7.

Thank you Gilles, that worked!

Don't know why I did not try that before :)

Dmitry.

399
Views
0
Helpful
2
Replies