Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

disable ssl version2 on CSS

Hi all,

i know that SSL version3 by default is enabled on the CSS.

is there anyway to disable SSL version 2 ?

Please Advice

Hasan

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: disable ssl version2 on CSS

the CSS11501 or CSS5-SSL module do not support sslv2.

There is no need to enter any command to disable it.

THe command I showed you previously indicates that we only supports SSLv3 and TLSv1.0

Gilles.

3 REPLIES
Cisco Employee

Re: disable ssl version2 on CSS

Are you referring to the ssl module ?

Here is what we support on the module :

CSS11503-2(config-ssl-proxy-list[gdufour])# ssl-server 1 version ?

ssl-tls SSL v3 & TLS v1

tls TLS Version 1

ssl SSL Version 3

No ssl version 2.

Gilles.

New Member

Re: disable ssl version2 on CSS

Hi Gilles,

i have the CSS11501-C box, it's not a seperate ssl module

but from my understanding it's same as ssl module.... right ?

so bu entering this command "no ssl version 2" i will disable ssl version 2 and only version 3 is allowed ?

Cisco Employee

Re: disable ssl version2 on CSS

the CSS11501 or CSS5-SSL module do not support sslv2.

There is no need to enter any command to disable it.

THe command I showed you previously indicates that we only supports SSLv3 and TLSv1.0

Gilles.

506
Views
0
Helpful
3
Replies
CreatePlease login to create content