01-09-2009 02:42 PM
Hi, I'm trying to convert from Telnet to SSH only. Viewing other posts on NetPro, I'm not really sure if I need to upgrade my License or not. As my show sshd commands are showing output to reflect some sort SSH config. What am I missing here ??
CSS11503# sh ver
Version: sg0810106 (08.10.1.06)
Flash (Locked): 08.10.1.06
Flash (Operational): 08.10.1.06
Type: PRIMARY
Licensed Cmd Set(s): Standard Feature Set
CSS11503# show sshd version
SSHield version 1.6.1, SSH version OpenSSH_3.0.2p1
CSS11503# show sshd config
Sshd Configuration Information:
-------------------------------
Access Restricted: Yes
Maximum Sessions Allowed: 5
Active Sessions: 0
Log Level: warning-4
Listen Socket Count: 1
Listen Port: 22
Listen Address: 0.0.0.0
Server Protocol(s): v1 v2
Server Key Bits: 768
RSA Protocol(SSH1): Enabled
Empty Passwords: Rejected
Keep Alive: Enabled
SSH2 Cipher List: aes128-cbc,3des-cbc,blowfish-cbc, etc...
1. In order to migrate to SSH as the only remote access method do I need to upgrade to the "Enhanced Feature Set" and then get the "Secure Management License" from Cisco or can I skip the Enhanced License and go direct to the Secure License?
2. Or do I just do a "no restrict SSH" ?
3. Are there any SSL keys that need to be generated with the "ssl genrsa" cmd or will the licensing upgrade take of this.
Input greatly appreciated!
Manjit.
01-12-2009 12:28 AM
All your questions are answered in the following documents :
"Configuring CSS Remote Access Methods"
Gilles.
11-10-2016 04:31 AM
Hello all.
We still have very old CSS boxe, is there any way to retrieve a license for SSH right now ? It's very urgent and licensing@cisco.com didn't reply :(
01-10-2017 05:52 AM
Hi Surya.. Were you able to extract license from an existing CSS to transfer to a different box?
Thanks
07-13-2015 04:12 PM
you need the ssh license....S11K-SEC2-K9
so you get "SSH Server" when you do show license
css# show version ?Version: ap0500003 (5.00 Build 3) ?Flash (Locked): 4.10 Build 33 ?Flash (Operational): 5.00 Build 3 ?Type: PRIMARY ?Licensed Cmd Set(s): Standard Feature Set Enhanced Feature Set Proximity Data Base SSH Server
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: