I am kind of proud of this since it was my first ACE-4710 implementation. It's not too complicated and can be cleaned up (for instance, I could remove most of the Layer 3 VLANs).
I have a number of VIPs here that are all sort of thrown out to a "front end" vlan.
I used the 4710 to do some NAT functions since the back end network is not reachable by the rest of the network. That is why you see a couple of RDP VIPs. This is to get access to the back end devices.
I also have VIPs for HTTPS load-balancing on the front end. I have one for the back end application that runs on port 8080.
Right now it works great and does what I need it to do.
If anyone has any other suggestions for performance increase, let me know. Mostly I post it here for the community to see a fully working config. Please ask questions.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
With Vignesh R. P.Welcome to the Cisco Support Community Ask the Expert
conversation.This is an opportunity to learn and ask questions of Cisco
expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and
support for the Cisco NX-OS Software platf...